The manual for the Suzuki Katana specifies the following tire sizes, pressures, and suggested brands (which many are quick to replace). Tire size and tire pressure for the Suzuki Katana Re-check the chain slack again to make sure it’s still within spec.When you’re done, tighten the axle to 100 Nm / 73 lb-ft, and tighten the adjuster lock nuts.Make sure that the adjustment is to the same point. Keep an eye on the alignment marks on either side of the axle.(Target chain slack for the Katana: 20-30 mm) Keep checking the chain tension to see if it has come within spec. Turn the adjuster nuts to tighten (or loosen) the chain.Loosen the rear axle and the adjuster lock nuts on either side of the axle.Suzuki Katana 1000 chain slack adjustmentĪs with previously, make sure that the motorcycle is on a level surface on its kickstand, in neutral, with no weight on it (no saddlebags / luggage). To adjust the chain slack on the Katana, follow the procedure below. * Correct tension / slack (20-30mm / 0.8-1.2 in at loosest point)ĭamage to the chain and sprockets includes loose pins, damaged rollers, dry or rusted links, kinked or binding links, excessive wear, and improper adjustment. Suzuki recommends that you maintain your chain regularly according to the following schedule. Either use a good-quality (and affordable) chain lube like Motul Chain Paste, or use a full on Motul Chain Care Kit to clean and restore a chain. Maintain your chain on your Katana regularly to ensure it operates safely and effectively. Suzuki Katana 1000 (2020+) maintenance schedule Maintaining your Chain on your Suzuki Katana Honda Coolant), replace every four years or 48,000 km otherwise, replace every two years or 24,000 km.Įngine oil (High-grade synthetic, Motul 300V)Įngine coolant “Super long-life” or an alternative
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |